๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

A note on the effect of lateral bending stiffness of stringers attached to a plate with a crack

โœ Scribed by K. Arin

Publisher
Elsevier Science
Year
1975
Tongue
English
Weight
352 KB
Volume
7
Category
Article
ISSN
0013-7944

No coin nor oath required. For personal study only.

โœฆ Synopsis

Abetrac-An

iniinite stringer which is assumed to be partially bonded to a plate through a layer of adhesive is considered. The stringer is assumed to have bending as well as longitudinal stiffness. The effect of the stringer's bending rigidity on the stress intensity factor at the tip of the crack is ilhrstrated. Shear stress distribution between the plate and the stringer and the stress intensity factors will be obtained from the solution of a system of Fredholm integral equations which represent the continuity of displacements along the lhte of bond.

๐Ÿ“œ SIMILAR VOLUMES

Bending vibration of a simply supported
Bending vibration of a simply supported rectangular plate with a crack parallel to one edge
โœ Roman Solecki ๐Ÿ“‚ Article ๐Ÿ“… 1983 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 519 KB

Natural flexural vibration of a simply supported rectangular plate with a symmetrically located crack parallel to one edge is considered. The problem is analyzed by means of finite Fourier transformation of discontinuous functions. The unknowns of the problem are the discontinuities of the displacem

A study on the fatigue crack growth in 9
A study on the fatigue crack growth in 9% Ni steel plate: Growth rate of surface crack in a plate under arbitrarily combined tension and bending
โœ A. Nagai; M. Toyosada; T. Okamoto ๐Ÿ“‚ Article ๐Ÿ“… 1975 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 590 KB

Cyclic growth rate of a surface crack is complicated by the three dimensional stress field around the crack and also by an interaction expected between the growth rate at every position on the contour. An analysis, based on the total energy around a smfoce crack, derived a correlation between strain