𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A new system for the measurement of effective interfacial area in agitated liquid—liquid contractors by the chemical method

✍ Scribed by D.S. Sankholkar; M.M. Sharma

Publisher
Elsevier Science
Year
1973
Tongue
English
Weight
390 KB
Volume
28
Category
Article
ISSN
0009-2509

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Extraction of pinenes into aqueous sulph
Extraction of pinenes into aqueous sulphuric acid: A convenient system for the measurement of effective interfacial area in liquid-liquid contactors
✍ S.S. Laddha; M.M. Sharma 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 331 KB

Shorter Communications 843 CONCLUSIONS NOTATION 1. When compared under equivalent conditions of bed height Rem, particle Reynolds number at miniium fluidization and excess gas velocity (U -U,,,,), at 200 and 300°C bubbles were U,, minimum fluidization velocity, cm/s 75-85% of the sizes observed at r

New systems and methods for the measurem
New systems and methods for the measurement of effective interfacial area and mass transfer coefficients in gas—liquid contactors
✍ K. Sridharan; M.M. Sharma 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 725 KB

New systems have been developed for the measurement of effective interfacial area, a, by the chemical method which allow the use of hydrocarbon solvents, such as toluene, xylene, etc; polar solvents, such as benzyl alcohol, cyclohexanol, etc; and highly viscous solvents, such as diethylene glycol, p

Attempts to determine the liquid—film co
Attempts to determine the liquid—film coefficient for physical absorption and effective interfacial area in a sieve plate column by the chemical method
✍ W. Pasiuk-Bronikowska 📂 Article 📅 1969 🏛 Elsevier Science 🌐 English ⚖ 689 KB

Values of the liquid-side mass transfer coefficient, kL and the interfacial area, a per unit volume of froth on a sieve plate (perforated area 55%) were found using the technique of absorption accompanied by irreversible pseudo-first order reaction. The experiments were carried out with several reac

A Study of the Measurement of Surface an
A Study of the Measurement of Surface and Interfacial Tension by the Maximum Liquid Drop Volume Method: II. Viscosity Effect on the Tension Measurement
✍ Bingyin Pu; Donghao Chen 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 66 KB 👁 1 views

The maximum liquid drop volume (v(max)) is measured by using a back-suction micrometer syringe piston technique. Different very viscous liquids are measured by (v(max)) and (v(f)) methods to observe the effect of viscosity on tension measurement. No apparent viscosity effect was observed in surface