This article describes the results of a project for the development of a lightweight wooden joist Jloor. The project concerns the further development of an earlier joist construction, in which very good laboratory and field results were obtained in the frequency range 100-3150 Hz. The work was carri
A new system for rating impact sound insulation
β Scribed by E. Gerretsen
- Publisher
- Elsevier Science
- Year
- 1976
- Tongue
- English
- Weight
- 753 KB
- Volume
- 9
- Category
- Article
- ISSN
- 0003-682X
No coin nor oath required. For personal study only.
β¦ Synopsis
The rating of impact sound insulation on the basis of tapping machine measurements with the ISO re-['erence values has proved to be unsatisfactory in practice. This is mainly due to the differences in spectrum shape of tapping machine noise and real liJe impact noises, such as walking. The problem can be solved by changing the reference values in accordance with these differences in spectrum shape. The difference between tapping and walking noise spectra has been established by measurements on 49 different floors. In the most important frequency range (125-500 Hz ) it was discovered to be sufficiently constant.
['or all the floor constructions considered
Thus a new set of reference values has been derived, based on the assumption that the NR-curves provide a correct subjective rating system for walking noise.
In addition, due account has been taken of the different frequency content at higher frequencies of impact noises other than those made by walking males, such as those made by walking females, jumping children, the moving of furniture, etc.
π SIMILAR VOLUMES
The laboratory test chamber described in this paper was designed to provide a test facility for the measurement of airborne sound insulation of party walls and their associated flanking construction. Initially developed as a research tool to overcome the need to carry outfield measurements on new dw