A New Polyelectrolyte Dosing Method: Injection into Deep Bed Filter Media

✍ Scribed by Ebubekir Yuksel; Murat Eyvaz; Tugrul S. Aktas; Ahmet M. Saatci

• Book ID: 102804751
• Publisher: John Wiley and Sons
• Year: 2011
• Tongue: English
• Weight: 672 KB
• Volume: 39
• Category: Article
• ISSN: 1863-0650
• DOI: 10.1002/clen.201000277

✦ Synopsis

Abstract

The aim of this paper was to investigate a novel method of polyelectrolyte injection into deep bed filter media. The raw water and the filter media used in the pilot filters were obtained from the Omerli Reservoir that supplies one million m^3^/day of water to the greater city of Istanbul. A cationic polyelectrolyte was injected at the entrance of the filter and at different depths of the sand bed. The effect of polyelectrolyte injection location and method was evaluated by measuring the effluent turbidity, effluent particle count, and the head losses at different locations of the sand media. It was observed that the simultaneous injection of the polyelectrolyte on top of the filter bed and at the center can lengthen the filter run time while achieving an effluent turbidity as low as 0.06 NTU (nephelometric turbidity unit) and 4 log (99.99%) particle removal.