𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A new method of determination of the permeability of vapors of volatile liquid substances through polymer membranes

✍ Scribed by Jan Izydorczyk; Józef Podkówka; Janusz Salwiński; Zbigniew Grzywna


Publisher
John Wiley and Sons
Year
1977
Tongue
English
Weight
492 KB
Volume
21
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A new apparatus for the determination of vapor permeability of volatile liquid substances through polymer membranes has been described. The permeability of the vapor is calculated from the measurements of the depression rate of the liquid meniscus in a calibrated capillary tube. The conditions of the measurements by means of the described method are very close to those of the average and practical application of foils. The method is characterized by a simple design of the apparatus, easy handling, and simplicity of the determinations, so it may constitute the basis of vapor permeability determination standards. The results obtained by means of the described method were compared with those derived from the partition cell method.


📜 SIMILAR VOLUMES


Development of a validated liquid chroma
✍ Dunge Ashenafi; Varalaxmi Chintam; Daisy van Veghel; Sanja Dragovic; Jos Hoogmar 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 382 KB 👁 1 views

## Abstract The present study describes the development and validation of a selective liquid chromatographic (LC) method for the analysis of tenofovir disoproxil fumarate (TDF) and its related substances. The gradient method uses a base deactivated C18 column (Hypersil BDS column; 25 cm×4.6 mm I.D.

New method of determining miscibility in
✍ C. Ranganathaiah; G. N. Kumaraswamy 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 156 KB 👁 1 views

## Abstract A new method has been developed to determine the probability of miscibility in binary polymer blends through hydrodynamic interaction. This is achieved by the measurement of the free volume content in blends of carefully selected systems—styrene acrylonitrile (SAN)/poly(methyl methacryl