A new K-band push-push VCO using a miniaturized hairpin resonator
✍ Scribed by Hyun-Wook Lee; Ki-Cheol Yoon; Hee Nam; Yun-Seong Eo; Jong-Chul Lee
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 229 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, a K‐band push‐push Voltage Controlled Oscillator (VCO) is presented using a miniaturized hairpin resonator (MHR) with a higher loaded quality factor and the reduced circuit area within 50% compared to the conventional one at 9.2 GHz.The MHR combined with the GaAs MESFET varactor shows a tuning range of 140 MHz, and this voltage tunable MHR is used to compose a push‐push VCO. It provides the frequency tuning range of 71 MHz with flatness of +0.13 dB, which is increased by 31 MHz compared to the conventional VCO. The voltage controlled push‐push oscillator based on the series feedback topology is implemented on 0.54 mm‐thick Teflon substrate with a dielectric constant of 2.54. The measurement shows the output power of 1.18 dBm, the fundamental signal power suppression of −33 dBc, and phase noise performance of −86.78 dBc/Hz at 100 kHz offset. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 699–701, 2010; Published online in Wiley InterScience (www.interscience. wiley.com). DOI 10.1002/mop.25007