✦ LIBER ✦

A new design approach for an injection-locked oscillator with an enhanced locking range

✍ Scribed by Youngsang Jun; Moon-Que Lee; Youngteak Lee; Sangwook Nam

Publisher: John Wiley and Sons
Year: 2001
Tongue: English
Weight: 137 KB
Volume: 31
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.10024

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A new approach to the narrow locking range problems of an injection‐locked oscillator (ILO) has been investigated using a feedback signal into the active device and a fictitious internal source generated by nonlinearities of the active device. Through this analysis, a new design methodology for an ILO with an enhanced locking range is proposed. Measured results verified the enhanced locking range of the ILO. © 2001 John Wiley & Sons, Inc. Microwave Opt Technol Lett 31: 325–327, 2001.

📜 SIMILAR VOLUMES

Development of a generic flow-injection

Development of a generic flow-injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach: Part II. Selection and evaluation of the chemical reaction parameters

✍ C Vannecke; M.S Bloomfield; Y Vander Heyden; D.L Massart 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 762 KB

Injection mould design (fourth edition):

Injection mould design (fourth edition): An introduction and design manual for the thermoplastic industry R. G. W. Pye, Longman Scientific and Technical, Essex, UK in association with the Plastics and Rubber Institute, London, copublished by John Wiley & Sons Inc., New York, 1989. pp. xii + 754, price £31·00. ISBN 0–582–01611–8

✍ Birley, A. W. 📂 Article 📅 1990 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 122 KB