𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A new class of miniature quadrature couplers for MIC and MMIC applications

✍ Scribed by Abdel Fattah Sheta; Ashraf Mohra; Samir F. Mahmoud


Publisher
John Wiley and Sons
Year
2002
Tongue
English
Weight
164 KB
Volume
34
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A new class of miniature quadrature couplers suitable for microwave integrated circuits (MICs) and monolithic microwave integrated circuits (MMICs) are presented. The proposed couplers have some advantages compared to conventional types, such as smaller size, no harmonic response, and wide stop‐band characteristics. Two 3‐dB quadrature couplers at two different frequencies, 0.9 and 10 GHz have been designed and simulated. The coupler designed at 900 MHz has been fabricated on Duroid substrate with microstrip technology. Compared to the standard quadrature coupler more than 65% area savings, has been achieved, and the first higher‐order response appears at 5.8 GHz. The measured results show good agreement with theoretical prediction. Β© 2002 Wiley Periodicals, Inc. Microwave Opt Technol Lett 34: 215–219, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.10421


πŸ“œ SIMILAR VOLUMES


Design and fabrication of a 180Β° hybrid
✍ Byeong-Ok Lim; Baek-Seok Ko; Tae-Jong Baek; Sung-Chan Kim; Dong-Hoon Shin; Jin-K πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 742 KB

In this paper, we design and fabricate a 180Β°hybrid ring coupler in order to prove the fabrication possibilities of various passive components, by applying millimeter waves using newly proposed transmission lines, that is, dialectric-supported air-gapped microstriplines (DAMLs). In order to reduce t

New approach for the analysis and design
✍ Jeffrey Chuan; Juan Pablo Pascual πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 227 KB

This article proposes a new approach for the analysis and design of negativeresistance oscillators using computer-aided engineering tools. The method presented does not require any special probe and makes the oscillator design similar to the methodology applied to amplifiers. It speeds up convergenc