𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A model for heat transfer in circulating fluidized beds

✍ Scribed by D. Subbarao; P. Basu

Publisher
Elsevier Science
Year
1986
Tongue
English
Weight
282 KB
Volume
29
Category
Article
ISSN
0017-9310

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Heat transfer mechanisms in gas fluidize
Heat transfer mechanisms in gas fluidized beds. Part 3: Heat transfer in circulating fluidized beds
✍ Prof. Dr.-Ing. Otto Molerus; Dr.-Ing. Wolfgang Mattmann πŸ“‚ Article πŸ“… 1992 πŸ› John Wiley and Sons 🌐 English βš– 340 KB πŸ‘ 2 views

Part 1 of this contribution reported on the effects of system properties on heat transfer between heating or cooling surfaces and bubbling fluidized beds. This investigation produced four correlations which define the respective maximum heat transfer. Part 2 of this study suggests that the heat tran

Heat transfer characteristics of liquid–
Heat transfer characteristics of liquid–solid circulating fluidized beds
✍ Kenichi Hashizume; Yoichi Kimura πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 401 KB πŸ‘ 1 views

## Abstract An experiment was conducted to obtain heat transfer data in liquid–solid circulating fluidized beds. In the experiment, two kinds of risers were provided, their inner diameter being 24 mm and 12 mm, respectively. Tested particles were of glass and ceramics, having a diameter range from

Axial and radial heat transfer studies i
Axial and radial heat transfer studies in a circulating fluidized bed
✍ B. V. Reddy; P. K. Nag πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 466 KB πŸ‘ 2 views

The axial and radial variation of the heat transfer coefficient in a circulating fluidized bed riser column, and the effect of operating parameters thereon, are investigated. The experimental set-up consists of a riser column of 102 mm;102 mm in bed cross-section, 5β€’25 m in height with a return leg