𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A mode II fracture specimen—finite element analysis

✍ Scribed by L. Banks-Sills; M. Arcan; H. Gabay

Publisher
Elsevier Science
Year
1984
Tongue
English
Weight
776 KB
Volume
19
Category
Article
ISSN
0013-7944

No coin nor oath required. For personal study only.

✦ Synopsis

A series of studies which demonstrate the potential of a proposed mode I1 fracture specimen are reported. First, previously obtained photoelastie results&31 are reviewed so that this paper will be self-contained. Then, a finite element analysis is presented in order not only to corroborate the experimental results but also to calibrate the specimen for Kuc measurements. Finally, a preliminary KII~ test performed on a brittle steel specimen is described.

📜 SIMILAR VOLUMES

A mixed mode fracture specimen for mode
A mixed mode fracture specimen for mode II dominant deformation
✍ L. Banks-Sills; M. Arcan; Y. Bortman 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 1011 KB

## Several theories have been proposed for the failure of metals, as well as for the angle of crack propagation in mixed mode loading. In order to demonstrate the validity of these theories, the majority of tests have been carried out with an oblique crack placed in a uniaxial stress field. Better

Finite element simulation of fast fractu
Finite element simulation of fast fracture in steel DCB specimen
✍ T. Nishioka; S.N. Atluri 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 910 KB

Results of a numerical simulation, based on an energy consistent moving singularity dynamic finite element procedure, of fast crack propagation and arrest in a high strength steel DCB specimen are presented. The influence of material properties of high strength steel on dynamic crack propagation and

Finite element analysis of the compact s
Finite element analysis of the compact shear specimen
✍ D. Hoyniak; J.C. Conway 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 328 KB

AImtract--Mode II stress intensity factors were generated for the compact shear specimen through finite element techniques. Results are compared to those obtained in a boundary collocation analysis with general agreement being shown but with somewhat greater variation in stress intensity factor indi

On the electrical potential analysis of
On the electrical potential analysis of a cracked fracture mechanics test specimen using the finite element method
✍ W.K. Wilson 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 943 KB

The use of the finite element method to calculate electrical potential drop vs crack extension calibration curves for fracture mechanics test specimens is investigated. The influence of finite element mesh size and the use of singular elements at the crack tip are considered. Also, some of the detai

Elastic-plastic finite element analysis
Elastic-plastic finite element analysis of dynamic fracture
✍ J. Ahmad; J. Jung; C.R. Barnes; M.F. Kanninen 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 766 KB

Recent evidence has pointed to the possible inadequacy of elastodynamic treatments of rapid crack propagation and crack arrest. This paper describes the development of a dynamic elastic-plastic finite element capability designed to address this concern by taking direct account of crack tip plasticit