A microcomputer control system for the measurement of fatigue crack growth data
โ Scribed by K.R. Abbott; P. Doig
- Publisher
- Elsevier Science
- Year
- 1986
- Tongue
- English
- Weight
- 899 KB
- Volume
- 23
- Category
- Article
- ISSN
- 0013-7944
No coin nor oath required. For personal study only.
โฆ Synopsis
A microcomputer-based system for the measurement of fatigue crack growth dnldn versus cyclic stress intensity factor AK data using compact-tension test specimens is described. The procedure has been developed to allow automatic measurement of crack growth rate under any specified combination and sequence of load conditions, i.e. AK and R (stress ratio) and includes the capability of establishing the threshold cyclic stress intensity factor A Ko. Crack extension measurement is effected from the elastic compliance evaluated from the AC component of the load and displacement signals to an accuracy of =3 +rn every 1000 load cycles. Results from a typical low-alloy-steel rotor forging are presented to illustrate the use of the system.
๐ SIMILAR VOLUMES
A large amount of previously published fatigue crack growth data obtained from 10in. wide centre-cracked sheet specimens of various materials has been re-analysed in terms of the range of stress intensity factor (AK) and the results presented as master curves of crack growth rate against AK. In addi
An investigation has been undertaken concerning the existence of a pivot point for stage II fatigue crack growth rate and more generally on the relation between the parameters m and C of Paris' law. From the literature review it is pointed out that there is not a unique pivot point but several which
Hansen, V. and Hegg, K., 1979. Description of a computer~ontrolled data logging system for measuring meteorological variables. Agric. Meteorol., 20: 451--457. A short description is made of the control and logics of a computer controlled data logging system. Special emphasis is given to the problem
A simple method of interfacing clinical and research laboratory equipment with a microcomputer is described. A four-channel buffer system has been constructed which stores data generated from laboratory instruments and then transmits the data directly to a microcomputer. The system is highly flexibl