✦ LIBER ✦

A machinability study of GFRP pipes using statistical techniques

✍ Scribed by S. Aravindan; A. Naveen Sait; A. Noorul Haq

Book ID: 105852285
Publisher: Springer
Year: 2007
Tongue: English
Weight: 333 KB
Volume: 37
Category: Article
ISSN: 0268-3768
DOI: 10.1007/s00170-007-1055-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Optimization of machining parameters of

Optimization of machining parameters of GFRP pipes using evolutionary techniques

✍ Abdullah Naveen Sait 📂 Article 📅 2010 🏛 Korean Society for Precision Engineering 🌐 English ⚖ 545 KB

Optimisation of machining parameters of

Optimisation of machining parameters of glass-fibre-reinforced plastic (GFRP) pipes by desirability function analysis using Taguchi technique

✍ A. Naveen Sait; S. Aravindan; A. Noorul Haq 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 247 KB

Assessment of debonding in GFRP joints u

Assessment of debonding in GFRP joints using damage identification techniques

✍ Renos A. Votsis; Marios K. Chryssanthopoulos 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 718 KB

Pultruded sections are used in many different civil engineering applications involving FRP composites, including a number of footbridges. These sections are typically joined through adhesive bonding and/ or mechanical interlock. The joint is clearly critical to load transfer and the avoidance of uni

Machinability evaluation in hard turning

Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques

✍ J. Paulo Davim; Luís Figueira 📂 Article 📅 2007 🏛 Elsevier Science ⚖ 195 KB

Turning hardened tool steel using ceramic cutting tool, has certain advantages over the traditional turning/hardening/cylindrical grinding practice in terms of increased productivity and reduced power consumption. The hard turning is generally performed without a coolant (additional environmental ad

Flexural retrofitting of RC buildings us

Flexural retrofitting of RC buildings using GFRP/CFRP – A comparative study

✍ H.R. Ronagh; A. Eslami 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 742 KB

Study of a 5 kW PEMFC Using Experimental

Study of a 5 kW PEMFC Using Experimental Design and Statistical Analysis Techniques

✍ B. Wahdame; D. Candusso; X. François; F. Harel; A. De Bernardinis; J.-M. Kauffma 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 537 KB

## Abstract Within the framework of the French inter lab SPACT project (Fuel Cell Systems for Transportation Applications), the behavior of a 5 kW PEM fuel cell stack, fed by humidified hydrogen and compressed air, is investigated in a test platform at Belfort, France. A set of polarization curves