✦ LIBER ✦

A Low-Temperature Cell for Laser Raman Spectroscopy on Condensed Films and Nonvolatile Solids

✍ Scribed by Shriver, D. F.; Swanson, B.; Nelson, N.

Book ID: 115358227
Publisher: Society for Applied Spectroscopy
Year: 1969
Tongue: English
Weight: 173 KB
Volume: 23
Category: Article
ISSN: 0003-7028
DOI: 10.1366/000370269774380806

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Low Temperature Sample Cell for a Laser

Low Temperature Sample Cell for a Laser Excited Raman Spectrophotometer

✍ Bates, John B.; Smith, William H. 📂 Article 📅 1969 🏛 Society for Applied Spectroscopy 🌐 English ⚖ 175 KB

Characterization of island films as surf

Characterization of island films as surface-enhanced Raman spectroscopy substrates for detecting low antitumor drug concentrations at single cell level

✍ G. D. Sockalingum; A. Beljebbar; H. Morjani; J. F. Angiboust; M. Manfait 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 183 KB 👁 2 views

Gold and silver vacuum-deposited island films were characterized by studying deposition variables such as film thickness, evaporation rate, and substrate temperature. For both metals, these parameters were correlated with the surface-enhanced Raman spectroscopy (SERS) effect and an increase in film

Effect of Laser Heating on the Local Tem

Effect of Laser Heating on the Local Temperature and Composition in Raman Spectroscopy: A Study of Ba(NO3)2 and BaO2 Decomposition

✍ Xie, Shuibo; Rosynek, Michael P.; Lunsford, Jack H. 📂 Article 📅 1999 🏛 Society for Applied Spectroscopy 🌐 English ⚖ 249 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB