A high-temperature chemical kinetic model for primary reference fuels
✍ Scribed by Marcos Chaos; Andrei Kazakov; Zhenwei Zhao; Frederick L. Dryer
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 720 KB
- Volume
- 39
- Category
- Article
- ISSN
- 0538-8066
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A chemical kinetic mechanism has been developed to describe the high‐temperature oxidation and pyrolysis of n‐heptane, iso‐octane, and their mixtures. An approach previously developed by this laboratory was used here to partially reduce the mechanism while maintaining a desired level of detailed reaction information. The relevant mechanism involves 107 species undergoing 723 reactions and has been validated against an extensive set of experimental data gathered from the literature that includes shock tube ignition delay measurements, premixed laminar‐burning velocities, variable pressure flow reactor, and jet‐stirred reactor species profiles. The modeled experiments treat dynamic systems with pressures up to 15 atm, temperatures above 950 K, and equivalence ratios less than approximately 2.5. Given the stringent and comprehensive set of experimental conditions against which the model is tested, remarkably good agreement is obtained between experimental and model results. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 399–414, 2007
📜 SIMILAR VOLUMES
## Abstract __n__‐Butyl methacrylate/styrene/__n__‐butyl acrylate (BMA/ST/BA) high‐temperature starved‐feed solution semibatch copolymerization and terpolymerization experiments with varying monomer feed composition, final polymer content, monomer feed time, and reaction temperature were carried ou
Water forms three-dimensional polymeric structures due to the influence of hydrogen bonds and is fundamentally different from other substances. One of the simplest ways to analyze the structure of water in any system, such as hydration, is to measure the degree of compressibility, which can be deter
## Abstract In the present study, a comprehensive mathematical model is developed for the free‐radical polymerization of styrene to predict the polymerization rate and the molecular‐weight distribution of the polymer. The kinetic model accounts for both chemical and thermal radical generation and,