𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A H2O2 fuel cell using acid doped polybenzimidazole as polymer electrolyte

✍ Scribed by J.-T. Wang; R.F. Savinell; J. Wainright; M. Litt; H. Yu

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
582 KB
Volume
41
Category
Article
ISSN
0013-4686

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Temperature-dependent Performances of a
Temperature-dependent Performances of a Fuel Cell Using a Superacid Zirconia-doped Nafion Polymer Electrolyte
✍ M. A. Navarra; C. Abbati; F. Croce; B. Scrosati πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 111 KB

## Abstract Sulphated zirconia‐added Nafion membranes were prepared and used as polymer electrolyte separators in H~2~‐air fuel cells. The cell performances of the composite membrane were compared with those of an unmodified Nafion membrane having the same thickness. The cell response was studied b

Polyaniline as a cathode for O2 reductio
Polyaniline as a cathode for O2 reductionβ€”Kinetics of the reaction with H2O2 and use of the polymer in a model H2O2 fuel cell
✍ Lioudmila Doubova; Giuliano Mengoli; Marco M. Musiani; Sergio Valcher πŸ“‚ Article πŸ“… 1989 πŸ› Elsevier Science 🌐 English βš– 525 KB

Oxygen reduction at a polyaniline cathode occurs in aqueous sulfuric acid through a chemica-electrochemical route which involves the intermediate oxidation of leucoemeraldine to emetaldine with the formation of H,O,. This paper specifically deals with the conversion of leucoemeraldine to emeraldine

Phosphotungstic Acid Supported on a Nano
Phosphotungstic Acid Supported on a Nanopowdered ZrO2 as a Filler in Nafion-Based Membranes for Polymer Electrolyte Fuel Cells
✍ A. SaccΓ ; A. Carbone; R. Pedicini; M. Marrony; R. Barrera; M. Elomaa; E. Passala πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 413 KB πŸ‘ 2 views

## Abstract An inorganic filler prepared by impregnation of phosphotungstic heteropolyacid on zirconia (HPW/Zr) was developed to be inserted into a perfluorosulphonic polymer matrix for a polymer electrolyte fuel cell (PEFC) operating at a medium temperature (80–120 °C) and low relative humidity (R