✦ LIBER ✦

A fully-coupled thermal multiphase wellbore flow model for use in reservoir simulation

✍ Scribed by S. Livescu; L.J. Durlofsky; K. Aziz; J.C. Ginestra

Book ID: 108236719
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 427 KB
Volume: 71
Category: Article
ISSN: 0920-4105
DOI: 10.1016/j.petrol.2009.11.022

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A model for coupling reservoir inflow an

A model for coupling reservoir inflow and wellbore flow in fishbone wells

✍ Peiqing Lian, Linsong Cheng, Xuequn Tan, Linlin Li 📂 Article 📅 2012 🏛 China University of Petroleum (Beijing) 🌐 English ⚖ 414 KB

A coupled model for multiphase fluid flo

A coupled model for multiphase fluid flow and sedimentation deformation in oil reservoir and its numerical simulation

✍ Ran Qiquan; Gu Xiaoyun; Li Shilun 📂 Article 📅 1997 🏛 The Chinese Society of Theoretical and Applied Mec 🌐 English ⚖ 515 KB

[Society of Petroleum Engineers SPE Rese

[Society of Petroleum Engineers SPE Reservoir Simulation Symposium - Houston, Texas (2003-02-03)] SPE Reservoir Simulation Symposium - A Generalized Wellbore and Surface Facility Model, Fully Coupled to a Reservoir Simulator

✍ Coats, B.K.; Fleming, G.C.; Watts, J.W.; Rame, M.; Shiralkar, G.S. 📂 Article 📅 2003 🏛 Society of Petroleum Engineers ⚖ 139 KB

Simulation of a compositional model for

Simulation of a compositional model for multiphase flow in porous media

✍ Zhangxin Chen; Guanren Huan; Hemei Wang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 114 KB

Coupling Of A Fracture Mechanics Model A

Coupling Of A Fracture Mechanics Model And A Thermal Reservoir Simulator For Tar Sands

✍ Settari, A.; Ito, Y.; Jha, K. 📂 Article 📅 1992 🏛 Society of Petroleum Engineers 🌐 English ⚖ 462 KB

A fully coupled dynamic model for two-ph

A fully coupled dynamic model for two-phase fluid flow in deformable porous media

✍ Bernhard A. Schrefler; Roberto Scotta 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 983 KB

A fully coupled dynamic model is presented for the analysis of water and air ¯ow in deforming porous media, in fully or partially saturated conditions. The solid displacements and the pressures of ¯uids are taken as primary unknowns of the model. The ®nite element method is used for the discrete app