𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A fracture mechanics approach to the effects of UV-degradation on polypropylene

✍ Scribed by G. E. Schoolenberg

Publisher
Springer
Year
1988
Tongue
English
Weight
981 KB
Volume
23
Category
Article
ISSN
0022-2461

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

A 3-D fracture mechanics approach to the
A 3-D fracture mechanics approach to the strength of composite materials
✍ E. Altus; A. Rotem πŸ“‚ Article πŸ“… 1981 πŸ› Elsevier Science 🌐 English βš– 706 KB

The first ply failure in composite laminates are studied by 3-D fracture mechanic approach. The fracture model is based on a crack embedded in one of the inner layers. Numeriil results for the case of "angle ply" laminates are based on a general 3-D finite difference progtam. Stress intensi~ factor

A fracture mechanics approach to the fai
A fracture mechanics approach to the failure of graphite in laboratory tests
✍ M. I. Darby πŸ“‚ Article πŸ“… 1976 πŸ› Springer Netherlands 🌐 English βš– 546 KB

Laboratory tests show that for some graphites the calculated stress at failure exceeds the tensile strength in uniform tension by an amount which depends on the test considered and increases with the severity of the stress gradient. Fracture mechanics has been applied to bend, internal pressure and

A fracture mechanics approach to the ten
A fracture mechanics approach to the tensile strength perpendicular to grain of dimension lumber
✍ A. P. Schniewind; D. E. Lyon πŸ“‚ Article πŸ“… 1973 πŸ› Springer 🌐 English βš– 948 KB

Six hundred short sections taken from 23 flatsawn 2 x 12-inch planks of construction grade Douglas-fir were tested in tension perpendicular to grain. ~ost of the specimens contained defects in the form of checks, knots, resin streaks, pitch pockets, and pith. Checks were found to be the major streng