𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A five port hybrid ring mixer design

✍ Scribed by Polydorou, A. ;Uzunoglu, N. ;Capsalis, C. ;Katehi, L.

Book ID
105457009
Publisher
Springer
Year
1995
Tongue
English
Weight
768 KB
Volume
16
Category
Article
ISSN
0195-9271

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A low-conversion-loss ring-hybrid mixer
A low-conversion-loss ring-hybrid mixer using TS-CMRC circuitry
✍ L. Chiu; T. Y. Yum; Q. Xue; C. H. Chan 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 100 KB

## Abstract This paper presents a new fundamental single‐balanced ring mixer incorporating T‐shaped compact microstrip resonant cells (TS‐CMRCs). The measured minimum single side‐band (SSB) down‐conversion loss of 3.3 dB is achieved for a 10.4‐GHz RF signal and is better than 6 dB from 9.6–11.5 GHz

Design and realization of millimeter-wav
Design and realization of millimeter-wave hybrid rings in a fin line
✍ Bharathi Bhat; S. K. Koul 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 253 KB

This article presents the realization of 3-dB hybrid rings at millimeter-warre frequencies in a bilateral fin-line configuration. With rings of convenient sizes, Ka-band devices offering low insertion loss (< 0.5 dB), low phase imbalance (< 5% and high isolation (> 25 dB) oiler about 10% bandwidth h

Design and fabrication of a 180° hybrid
Design and fabrication of a 180° hybrid ring coupler inserted into a slow-wave structure for MMIC applications using dielectric-supported air-gapped microstriplines
✍ Byeong-Ok Lim; Baek-Seok Ko; Tae-Jong Baek; Sung-Chan Kim; Dong-Hoon Shin; Jin-K 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 742 KB

In this paper, we design and fabricate a 180°hybrid ring coupler in order to prove the fabrication possibilities of various passive components, by applying millimeter waves using newly proposed transmission lines, that is, dialectric-supported air-gapped microstriplines (DAMLs). In order to reduce t