The unglazed transpired solar collector is now a well-recognised solar air heater for heating outside air directly. Example applications include pre-heating ventilation air and heating air for crop drying. The outside air in question is sucked straight from ambient, uniformly through the whole surfa
A field study of the wind effects on the performance of an unglazed transpired solar collector
✍ Scribed by B.A. Fleck; R.M. Meier; M.D. Matović
- Publisher
- Elsevier Science
- Year
- 2002
- Tongue
- English
- Weight
- 825 KB
- Volume
- 73
- Category
- Article
- ISSN
- 0038-092X
No coin nor oath required. For personal study only.
✦ Synopsis
An experimental study was carried out on a working unglazed transpired solar collector (UTSC) to determine what effects ambient wind has on its performance. The monitoring system included instruments to measure temperatures, collector outlet flow rates, solar radiation, wind speed, and wind direction; as well as an ultrasonic anemometer placed near the centre of the collector. Efficiency was defined as the fraction of incident solar heat flux that went to preheating the transpired air. Our observations indicate a high degree of turbulence near the wall which feeds the near wall region. This is supported by observations of efficiency which decrease monotonically with increasing turbulence intensities. It was also observed that peak efficiencies did not occur at the lowest wind speeds. Both these findings seem to contradict existing laminar boundary layer models for UTSC performance.
📜 SIMILAR VOLUMES
A theoretical numerical model of thermal transfer in a line-axis, symmetric, compound parabolic concentrating solar energy collector (CPC) is presented. The effect of the angle of axial inclination of an east-west aligned CPC and hence the effect of the latitudinal and tracking configuration of the