This software (which accompanies McCarroll and Nesje, 1996, Earth Surface Processes and Landforms Vol. 21, 963-977) is designed to quantify the roughness of rock surfaces from profiles recorded using either a micro-roughness meter or a simple profile gauge. The roughness index used is the standard d
A digital surface roughness meter
โ Scribed by W. Brian Whalley; Brice R. Rea
- Publisher
- John Wiley and Sons
- Year
- 1994
- Tongue
- English
- Weight
- 371 KB
- Volume
- 19
- Category
- Article
- ISSN
- 0360-1269
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
In a forward-roll coating gap or nip, steady laminar flow of liquid between counter-rotating cylinders or rolls is used to split the flow into a coated layer on one roll and a rejected layer on the other. Both layers have free surfaces in contact with air. Liquid may be carried into the gap as a lay
Laboratory experiments were conducted to study the properties of roughness parameters over surfaces with small-scale heterogeneity, using a wind tunnel ยฎtted with an underlying weighting lysimeter packed with uniform ยฎne sand. Either small columns or sand ridges were distributed homogeneously or non
is kindly acknowledged for providing the PDMS channel mask used to prepare some of the masters. Dr. Robert J Barsotti, Jr., and Tan Mau Wu are kindly acknowledged for help in the preparation of the square array masters. Prof. Y. M Chiang, Prof. Darrell Irvine, and Prof. Anne Mayes are acknowledged f
Measurements of unsteady wetting on a rough surface were made. Spreading was initiated by electrically altering the solidliquid surface tension. The resultant time-dependent interface shape could be described by steady theory augmented with an ad hoc model which accounts for surface roughness. Flatt