✦ LIBER ✦

A device for control of high speed compression testing at constant true strain rates

✍ Scribed by Fitzsimons, G; Kuhn, H A

Book ID: 118144070
Publisher: Institute of Physics
Year: 1982
Weight: 331 KB
Volume: 15
Category: Article
ISSN: 0022-3735
DOI: 10.1088/0022-3735/15/5/007

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A NEW TECHNIQUE FOR TENSILE TESTING OF C

A NEW TECHNIQUE FOR TENSILE TESTING OF COMPOSITE MATERIALS AT HIGH STRAIN RATES

✍ Z.G. Liu; G.Y. Chiem 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 138 KB

Deformation parameters governing tensile

Deformation parameters governing tensile elongation for a mechanically milled Al–1.1at.%Mg–1.2at.%Cu alloy tested in tension at constant true strain rates

✍ T. Hasegawa; T. Takahashi; K. Okazaki 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 292 KB

AbstractÐFor a mechanically milled Al±1.1at.%Mg±1.2at.%Cu alloy, tensile deformation was carried out at temperatures of 523±823 K and at true strain rates of 1 Â 10 À3 ±5 Â 10 0 asX The analysis of true stress± true strain curves from a dislocation dynamics viewpoint showed that a large value of re-

The flying wedge: a method for high stra

The flying wedge: a method for high strain rate tensile testing. Part 2: Characteristics of the device

✍ B.N. Cole; J.L. Sturges 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 251 KB

The flying wedge concept, and the design and commissioning of the device have been described in the first part of this paper. In this second paper the operation of the device is analysed using a rigid-body mechanics model, to gain an understanding of its dynamic behaviour, in particular, the effects