✦ LIBER ✦

A cryostat for studying ultrasonic attenuation in solids at temperatures down to 0.32 K

✍ Scribed by A.G. Shepelev

Publisher: Elsevier Science
Year: 1973
Tongue: English
Weight: 312 KB
Volume: 13
Category: Article
ISSN: 0011-2275
DOI: 10.1016/0011-2275(73)90270-1

No coin nor oath required. For personal study only.

✦ Synopsis

for AISI 304), and the molten stainless steel flows onto the higher melting-point member, vanadium (mp 1 900°C). This liquid-to-solid interalloying reaction is controlled to as small extent as possible.

📜 SIMILAR VOLUMES

A machine for studying deformation at te

A machine for studying deformation at temperatures down to 1·5 K

✍ V.E. Vergola; V.P. Gorbach; V.B. Pariiskii; I.A. Shapovalov 📂 Article 📅 1971 🏛 Elsevier Science 🌐 English ⚖ 175 KB

Most low temperature deformation machines, working down to 1-3-4 K ~-7 are designed to study a single specimen on each cooling. Multi-position attachments have been developed for studies of extension, a' 9 We describe below a low temperature deformation machine in which up to nine specimens can be t

A method for studying the electrical pro

A method for studying the electrical properties of specimens in the pressure region up to 300 kbar and at temperatures from 0.1 to 200 K

✍ N.B. Brandt; I.V. Berman; Yu.P. Kurkin; V.I. Sidorov 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 277 KB

## Table 1. Additional sample data [% catalyst is from the ratio of the weight of the catalyst to the weight of the resin. AL/L (total) is (L293 -L4.2)/L293. The slope at T = 293 K is the negative of the thermal expansion coefficients at room temperature] Cure Cure 105 % time, temp, (AL/L) Slope E