𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A comparison of simulation models for empty tubular reactors

✍ Scribed by K.M. Sundaram; G.F. Froment

Publisher
Elsevier Science
Year
1979
Tongue
English
Weight
661 KB
Volume
34
Category
Article
ISSN
0009-2509

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Evaluation of models for tubular, lamina
Evaluation of models for tubular, laminar flow reactors
✍ Theodore S. Andersen; James Coull πŸ“‚ Article πŸ“… 1970 πŸ› American Institute of Chemical Engineers 🌐 English βš– 981 KB

## Abstract Significant error can result when the plug flow model is applied to the analysis or design of luminar flow reactors due to nonconstant radial profiles of velocity, composition, and temperature. An analysis and comparison of suitable models for the nonisothermal, homogeneous, first‐orde

Tubular reactors for emulsion polymeriza
Tubular reactors for emulsion polymerization: II. Model comparisons with experiments
✍ D. A. Paquet Jr.; W. H. Ray πŸ“‚ Article πŸ“… 1994 πŸ› American Institute of Chemical Engineers 🌐 English βš– 703 KB

## A dynamic model f o r emulsion polymerization in a tubular reactor has been developed and compared with experimental data. The model uses an axial dispersion coefficient to fit experimentally measured residence time distributions and to represent axial mixing during reaction. Very general emulsio

Modeling of chemical reactorsβ€”XXXI: The
Modeling of chemical reactorsβ€”XXXI: The one-phase backflow cell model used for simulation of tubular adiabatic reactors
✍ J. Sinkule; V. HlavÑček; J. Votruba πŸ“‚ Article πŸ“… 1976 πŸ› Elsevier Science 🌐 English βš– 455 KB

The backflow cell model is used to simulate steady state operation of a tubular adiabatic reactor. The model proposed embraces different mechanism of axial dispersion of heat and mass. It will be shown that the backflow cell model may be used for approximation of the dispersion model. While there ar