𝔖 Bobbio Scriptorium

✦ LIBER ✦

A Comparison of Ray Trajectories in Plasma Characterized by Cold and Warm Dielectric Tensors

✍ Scribed by Hui, Bertram

Book ID: 117932522
Publisher: IEEE
Year: 1983
Tongue: English
Weight: 473 KB
Volume: 11
Category: Article
ISSN: 0093-3813
DOI: 10.1109/tps.1983.4316267

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Characterization of Pore Structure in a

Characterization of Pore Structure in a Nanoporous Low-Dielectric-Constant Thin Film by Neutron Porosimetry and X-ray Porosimetry

✍ Hedden, Ronald C.; Lee, Hae-Jeong; Soles, Christopher L.; Bauer, Barry J. 📂 Article 📅 2004 🏛 American Chemical Society 🌐 English ⚖ 196 KB

Synthesis and characterization of alumin

Synthesis and characterization of alumina nano-powders by oxidation of molten aluminium in a thermal plasma reactor: Comparison with theoretical estimation

✍ S. Kumar; Kicheol Kang; Gyuyeol Bae; V. Selvarajan; Changhee Lee 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 985 KB

Characterization of Nonmelted Particles

Characterization of Nonmelted Particles and Molten Splats in Plasma-Sprayed Al2O3Coatings by a Combination of Scanning Electron Microscopy, X-ray Diffraction Analysis, and Confocal Raman Analysis

✍ Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li 📂 Article 📅 2012 🏛 Springer US 🌐 English ⚖ 491 KB

Characterization of the radioactive meta

Characterization of the radioactive metabolites of the 5-HT1A receptor radioligand, [O-methl-11C]WAY-100635, in monkey and human plasma by HPLC: Comparison of the behaviour of an identified radioactive metabolite with parent radioligand in monkey using PET

✍ Safiye Osman; Camilla Lundkvist; Victor W. Pike; Christer Halldin; Julie A. McCa 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 803 KB

Quantitative characterization of impact

Quantitative characterization of impact damage in composite materials — a comparison between computerized vibrothermography and X-ray tomography: 43747 Potet, P.; Lesbre, F.; Bathias, C. Nondestructive testing and evaluation for manufacturing and construction. Edited by H.L.M. dos Reis. pp. 95–105. Hemisphere Publishing Corporation, (1990). ISBN 0-89116-926-1

📂 Article 📅 1990 🏛 Elsevier Science ⚖ 133 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB