✦ LIBER ✦

A comparison between the extrusion forces and sphere quality of a gravity feed extruder and a ram extruder

✍ Scribed by L. Baert; J.P. Remon; P. Knight; J.M. Newton

Book ID: 113365800
Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 314 KB
Volume: 86
Category: Article
ISSN: 0378-5173
DOI: 10.1016/0378-5173(92)90196-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Comparison between a gravity feed extrud

Comparison between a gravity feed extruder and a twin screw extruder

✍ L. Baert; J.P. Remon; J.A.C. Elbers; E.M.G. Van Bommel 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 484 KB

A comparison of the extrusion and sphero

A comparison of the extrusion and spheronization behaviour of wet powder masses processed by a ram extruder and a cylinder extruder

✍ K.E. Fielden; J.M. Newton; R.C. Rowe 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 836 KB

A thermoanalytical comparison between ra

A thermoanalytical comparison between ram and screw extruded polypropylene

✍ F.W. Hampson; T.R. Manley 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 314 KB

Comparison between a twin-screw extruder

Comparison between a twin-screw extruder and a rotary ring die press. I. Influence of formulation variables

✍ Christian Schmidt; Hans Lindner; Peter Kleinebudde 📂 Article 📅 1997 🏛 Elsevier Science 🌐 French ⚖ 899 KB

Comparison between a twin-screw extruder

Comparison between a twin-screw extruder and a rotary ring die press. Part II: influence of process variables

✍ Christian Schmidt; Peter Kleinebudde 📂 Article 📅 1998 🏛 Elsevier Science 🌐 French ⚖ 683 KB

Pressure buildup in the feed zone of a s

Pressure buildup in the feed zone of a single screw extruder—the effect of density compressibility

✍ Tzu-Hsiung Sun 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 239 KB 👁 1 views

The effect of density compressibility of granular polymeric solids on the pressure development inside the feed zone of a single screw extruder was calculated. Results indicate that, for a given flow rate, density compressibility enhances pressure rise inside the extruder, remedying the under estimat