## Abstract In this letter, the design, the analysis, and the measurement results of a new compact planar ultra‐wideband CPW‐fed antenna with dual‐notched characteristics are presented. The radiating element is a planar square monopole with a circular base. A dual‐notched bands characteristic is ob
A compact printed CPW-fed UWB antenna with dual band-notched characteristics
✍ Scribed by Tao Ni; Yong-Chang Jiao; Wei-Mei Li; Lei Zhou; Fun-Shun Zhang
- Book ID
- 112145068
- Publisher
- John Wiley and Sons
- Year
- 2012
- Tongue
- English
- Weight
- 983 KB
- Volume
- 54
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A novel ultra‐wideband (UWB) design of a single‐layer coplanar waveguide‐fed planar monopole antenna with dual band‐notched characteristic is presented. By inserting two opened rectangular loop slots to the ground‐notched trapezoidal patch and adjusting the dimensions of the slots, the
## Abstract In this article, the design and analysis of a CPW‐fed UWB antenna with dual band‐notched characteristics are presented. The measured bandwidth defined by VSWR <2 of the proposed antenna is from 2.8 to 11.7 GHz, except the bandwidths of 3.35–4.35 GHz for WiMAX and C‐band satellite commun
## Abstract A CPW‐fed monopole ultra wide band (UWB) antenna, which has small dimension of (15.5 × 17 mm^2^), is proposed. To miniaturize the antenna size, the sunken ground plane and narrow feeding‐strip are introduced. A slot notched on the center of radiator is used to fine‐tune the impedance ma
## Abstract This article presents a band‐notched planar slot antenna presented to overcome interference with some already existing standards such as the IEEE802.11a and HYPERLAN/2 systems. The slot antenna, evolved from an elliptical aperture antenna, is fed by CPW with an elliptical tuning‐stub to