𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A calorimetiric study of precipitation process in Al-Li-Mg alloy

✍ Scribed by Hyung-Ho Jo; Tamio Ohshima; Ken-ichi Hirano

Publisher
Elsevier Science
Year
1985
Tongue
English
Weight
273 KB
Volume
92
Category
Article
ISSN
0040-6031

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Precipitation process in a cast alloy Al
Precipitation process in a cast alloy Al-3.5 wt.pct Zn-4 wt.pct Mg
✍ Dr. Lecong Dzuong πŸ“‚ Article πŸ“… 1980 πŸ› John Wiley and Sons 🌐 English βš– 372 KB

## Abstract The structural changes during ageing of an alloy containing 3.5 wt.pct Zn and 4 wt.pct Mg were studied by means of transmission electron microscopy. It was shown that the precipitation process in this alloy differs from that in the alloys having high Zn/Mg ratios. The following phases w

Plastic flow instability in a precipitat
Plastic flow instability in a precipitation hardened Alξ—ΈZnξ—ΈMg alloy
✍ J. Wood; P.G. McCormick πŸ“‚ Article πŸ“… 1987 πŸ› Elsevier Science βš– 609 KB

A study of the effect of precipitation hardening on the yield behaviour in torsion of an Al-Zn-Mg alloy has been carried out. Two modes of unstable yield behaviour were observed. As-quenched and well over-aged specimens exhibited serrated yielding. Specimens aged at elevated temperatures exhibited

The effect of iron on the precipitation
The effect of iron on the precipitation in an Al-Mg-Si alloy
✍ Dr. U. Schmidt; M. Joachimi; L. Petzold; Dr. F. Eichhorn πŸ“‚ Article πŸ“… 1984 πŸ› John Wiley and Sons 🌐 English βš– 523 KB

The effect of iron on the precipitation of a technical Al-Mg-Si alloy was studied by macroand microhardness, Y-modulus and SANS with D K D and was coinpared with a pure alloy. The iron phases of the technical alloy were preferentially considered by the SANS. I n addition the daniping by the elastoma