✦ LIBER ✦

A bit–rock interaction model for rotary–percussive drilling

✍ Scribed by Franca, Luiz F.P.

Book ID: 108148258
Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 771 KB
Volume: 48
Category: Article
ISSN: 0148-9062
DOI: 10.1016/j.ijrmms.2011.05.007

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A unified prediction model for percussiv

A unified prediction model for percussive and rotary drilling

✍ Rabia, Hussain 📂 Article 📅 1985 🏛 Elsevier Science ⚖ 661 KB

Reliability analysis of BGA rotary-percu

Reliability analysis of BGA rotary-percussive units for drilling boreholes in rock

✍ L. T. Dvornikov; N. I. Gudimov; V. A. Turov; A. P. Davydov 📂 Article 📅 1979 🏛 Springer 🌐 English ⚖ 467 KB

A SELF-EXCITED SYSTEM FOR PERCUSSIVE-ROT

A SELF-EXCITED SYSTEM FOR PERCUSSIVE-ROTARY DRILLING

✍ A.D. BATAKO; V.I. BABITSKY; N.A. HALLIWELL 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 852 KB

A dynamic model for a new principle of percussive-rotary drilling is presented. This is a non-linear mechanical system with two degrees of freedom, in which friction-induced vibration is used for excitation of impacts, which influence the parameters of stick-slip motion. The model incorporates the f

Mechanism of wear of rotary-percussive d

Mechanism of wear of rotary-percussive drilling bits and the effect of rock type on wear

✍ K.J. Swick; G.W. Stachowiak; A.W. Batchelor 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 650 KB

3D numerical modelling of bit-rock fract

3D numerical modelling of bit-rock fracture mechanisms in percussive drilling with a multiple-button bit

✍ Saksala, Timo 📂 Article 📅 2013 🏛 John Wiley and Sons 🌐 English ⚖ 810 KB

Seal assembly for a rotary earth drillin

Seal assembly for a rotary earth drilling bit

📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 131 KB

ary seal assembly. This enables the mechanical seal to be fitted to equipment where the shaft is out of alignment with the equipment casing. This ability to accommodate angular variation can be achieved without any consequential misalignment of the sealing faces of the seal.