✦ LIBER ✦

99/03301 Combustion of solid fuels in a circulating fluidized bed

Publisher: Elsevier Science
Year: 1999
Weight: 203 KB
Volume: 40
Category: Article
ISSN: 0140-6701
DOI: 10.1016/s0140-6701(99)91256-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Cotton Stalk Combustion in a Circulating

Cotton Stalk Combustion in a Circulating Fluidized Bed

✍ Z. Sun; B. S. Jin; M. Y. Zhang; R. P. Liu 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 298 KB 👁 2 views

## Abstract The basic properties of cotton stalk (CS) of length 10–100 mm and its ash were investigated. Studies concerning the combustion characteristics of CS were performed in a circulating fluidized bed (CFB) test facility with a heat input of 0.5 MW. According to previous cold tests, there is

Co-combustion of Municipal Solid Waste a

Co-combustion of Municipal Solid Waste and Coal in a Circulating Fluidized Bed

✍ Dong, Changqing ;Jin, Baosheng ;Lan, Jixiang 📂 Article 📅 2008 🏛 Curtin University of Technology 🌐 English ⚖ 335 KB 👁 2 views

Measurement of solid circulation rate in

Measurement of solid circulation rate in a circulating fluidized bed

✍ Satoru Matsuda 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 582 KB

A method using an optical mouse sensor was developed to monitor the moving velocity of a solid mass. Calibration was carried out using a rotating plate. Results clarified that the developed method is useful to monitor the velocity up to some limit (v b 0.3 m/s), which depends on the optical mouse se

Combustion of low-grade coals in circula

Combustion of low-grade coals in circulating fluidized bed

📂 Article 📅 2001 🏛 Elsevier Science ⚖ 169 KB

Dynamics of combustion of solid fuel par

Dynamics of combustion of solid fuel particles in a fluidized bed under pressure

📂 Article 📅 2002 🏛 Elsevier Science ⚖ 168 KB

Axial solids mixing in a circulating flu

Axial solids mixing in a circulating fluidized bed

✍ Yu.S. Teplitsky; V.A. Borodulya; E.F. Nogotov 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 261 KB

A phenomenological model of axial solids mixing in a circulating fluidized bed is formulated. The model allows for main specific features of the process: ascending motion of particles in the core zone and their descending motion in the annular zone (inner circulation of solids); substantial changes