01 Solid fuels (sources, winning, properties) the deposit, being obtained in 40% yield at maximum and containing little ash, would be well utilized as either clean fuel or raw materials for the subsequent conversion.
98/04062 Solid fuel combustion apparatus
- Publisher
- Elsevier Science
- Year
- 1998
- Weight
- 206 KB
- Volume
- 39
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
โฆ Synopsis
10 Engines (power generation and propulsion, electrical vehicles)
tion zone has to be included. In addition to the radiant fraction, another scaling parameter accounting for the radiation losses from the post-flame region is needed.
๐ SIMILAR VOLUMES
09 Combustion (burners, combustion systems) NO, reduction, but less effective for NzO reduction; the optimum value of the ratio of primary/ total air was -0.8 for minimizing NO, emissions. Limestone injection at calcium-sulfur molar ratios >2:1 made it possible to remove >90% of SOz formed, although
09 Combustion (burners, combustion systems) NO, reduction, but less effective for NzO reduction; the optimum value of the ratio of primary/ total air was -0.8 for minimizing NO, emissions. Limestone injection at calcium-sulfur molar ratios >2:1 made it possible to remove >90% of SOz formed, although
the primary combustion zone were studied. NO, values ~200 mg/m' were achieved by air grading with NH3 addition, fuel grading with CH4, by fuel separation grading with pyrolysis gas won from the coal at low air ratios and long retention times.