✦ LIBER ✦

98/03806 Study on properties to evaluate quality of fly ash

Publisher: Elsevier Science
Year: 1998
Weight: 212 KB
Volume: 39
Category: Article
ISSN: 0140-6701
DOI: 10.1016/s0140-6701(98)93801-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Studies on the pozzolanic and hydraulic

Studies on the pozzolanic and hydraulic properties of fly ashes in model systems

✍ B. Pacewska; G. Blonkowski; I. Wilińska 📂 Article 📅 2008 🏛 Springer Netherlands 🌐 English ⚖ 375 KB

Evaluation of Coupling Agents in Poly(pr

Evaluation of Coupling Agents in Poly(propylene)/Fly Ash Composites: Effect on Processing and Mechanical Properties

✍ Itziar Iraola-Arregui; Herman Potgieter; Christopher Mark Liauw 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 712 KB

## Abstract Composites containing 50 wt.‐% fly ash in a PP homopolymer were prepared via batch mixing and compression moulding. The following coupling agents were evaluated: Lubrizol Solplus C800, __N,N__′__‐__(1,3‐phenylene)dimaleimide, γ‐methacryloxypropyltrimethoxysilane and maleic‐anhydride‐gra

The Impact of Filling an Abandoned Open

The Impact of Filling an Abandoned Open Cast Mine with Fly Ash on Ground Water Quality: A Case Study

✍ Bably Prasad; Kajal Kr. Mondal 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 165 KB

Studies on mechanics of development of p

Studies on mechanics of development of physical and mechanical properties of high-volume fly ash-cement pastes

✍ R.F. Feldman; G.G. Carette; V.M. Malhotra 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 534 KB

98/03804 Study of the effect of the phys

98/03804 Study of the effect of the physical properties of coal ash on air entraining capacity

📂 Article 📅 1998 🏛 Elsevier Science ⚖ 193 KB

98/02239 Case study of the conversion of

98/02239 Case study of the conversion of tangential- and wall-fired units to low-NOx combustion: Impact on fly ash quality : Hower, J. C. et al. Waste Management, 1997, 17, (4), 219–229

📂 Article 📅 1998 🏛 Elsevier Science ⚖ 201 KB

Steam raising (boiler operation/design) presented in order to evaluate the control flexibility. The results of three control problems are finally shown in order to prove the reliability of the suggested control technique.