method was developed for the production of carbon adsorbents from brown coal and the products analyzed. A mixture of brown coal with shale resin and propane asphalt enables one to produce, through existing industrial process, carbon adsorbents with high mechanical strength, low ash content (3.0-4.5%
98/03801 Production of activated carbon by carbonization of brown coal
- Publisher
- Elsevier Science
- Year
- 1998
- Weight
- 193 KB
- Volume
- 39
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
The acid-leached char produced in high yield by the pyrolysis of the potassium salt of a brown coal (Yallourn seam, Victoria, Australia) is shown to have an internal surface area in excess of 1100 m\*/g without the need for activation. Tabletting, or extrusion, of the potassium salt of the coal perm
In Japanese) Fly ash is used in mortar or concrete compositions at an amount of cement/ fly ash weight ratio of 20.5 when the pH of 20% coal ash slurry is >ll.O, cement/fly ash wt. ratio of ~0.7 when the pH of 20% coal ash slurry is ~9.0 but *l.O when the pH of 20% coal ash slurry is >h.O but ~9.0.
04 By-products related to fuels
0 1 Solid fuels (derived solid fuels) The title method involves (a) the use of a faujasite type zeolite (SiOz/ AlzOs mol ratio = l-6) as an adsorbent, and (b) the use of a C&a aromatic hydrocarbon as eluent. The title method is useful for separation of benzothiophene from naphthalene in coal tar.