𝔖 Bobbio Scriptorium
✦   LIBER   ✦

98/00648 Effects of ceramic coatings on corrosion prevention in coal liquefaction atmospheres


Book ID
104283695
Publisher
Elsevier Science
Year
1998
Weight
187 KB
Volume
39
Category
Article
ISSN
0140-6701

No coin nor oath required. For personal study only.

✦ Synopsis


12 Refractories/ceramics (properties, production, applications) tubular shaft in channel-type induction furnace, and the excess CO gas byproduct is burned for auxiliary heating. Molten slag is typically formed in the reaction-stage layer, and is floated below the burden and over the molten metal before tapping. Using the feed with particle size < 10 mm, the induction-furnace method is suitable for reduction of the ores and/or wastes of Fe, Cr, Mn, Cu, Zn, and/or Pb.


πŸ“œ SIMILAR VOLUMES


98/01546 Effects of ceramic coatings on
πŸ“‚ Article πŸ“… 1998 πŸ› Elsevier Science βš– 181 KB

72 Refractories/ceramics (properties, production, applications) refractory life and energy efficiency in order to increase the post combustion ratio. Coke is a most useful fuel source because it shows low dependence to post combustion ratio and low hydrogen content. The quality of hot metal would be

The effect of hydrogen chloride on the c
✍ K. S. Coley; K. Blick; J. E. Rhoades-Brown πŸ“‚ Article πŸ“… 1989 πŸ› John Wiley and Sons 🌐 German βš– 870 KB

An iron chromium aluminium yttrium steel was exposed to a simu-Ein Chrom-Aluminium-Yttrium-Stahl wurde einer simulierten Kohlevergasungsatmosphare ausgesetzt, die lo00 ppm bzw. 2200 ppm Chlorwasserstoff enthielt und deren Temperatur 450 "C betrug. Durch Erhohen des Chlorwasserstoffgehalts werden die

98/02244 The effect of coal chlorine and
πŸ“‚ Article πŸ“… 1998 πŸ› Elsevier Science βš– 201 KB

Steam raising (boiler operation/design) presented in order to evaluate the control flexibility. The results of three control problems are finally shown in order to prove the reliability of the suggested control technique.