✦ LIBER ✦

97/03360 Photoacoustic measurement of unburned carbon in fly ash

Publisher: Elsevier Science
Year: 1997
Weight: 199 KB
Volume: 38
Category: Article
ISSN: 0140-6701
DOI: 10.1016/s0140-6701(97)85234-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

97/02162 The measurement of unburned car

97/02162 The measurement of unburned carbon in fly ash using infrared photoacoustics

📂 Article 📅 1997 🏛 Elsevier Science ⚖ 387 KB

Studies were carried out to study devolatilization and combustion of single spherical particles of wood. hydrolytic lignin from ethanol production, leather processing wastewater sludge. and low-grade Belarus brown coals in a fluidized hed of sand. A two-phase model of hiowaste fluidized bed combusti

Precision and accuracy of photoacoustic

Precision and accuracy of photoacoustic measurements of unburned carbon in fly ash

✍ Maohong Fan; Robert C Brown 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 221 KB

Comparison of optically and microwave ex

Comparison of optically and microwave excited photoacoustic detection of unburned carbon in entrained fly ash

✍ Jeffrey R. Dykstra; Robert C. Brown 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 681 KB

Systematic errors in the use of loss-on-

Systematic errors in the use of loss-on-ignition to measure unburned carbon in fly ash

✍ Robert C. Brown; Jeff Dykstra 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 605 KB

Photoacoustic response of unburnt carbon

Photoacoustic response of unburnt carbon in fly ash to infrared radiation

✍ David J. Waller; Robert C. Brown 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 822 KB

The photoacoustic response of unburnt carbon in fly ash to infrared radiation was investigated. The photoacoustic effect is the conversion of modulated electromagnetic radiation absorbed by gaseous, liquid or solid media into an acoustic wave, which can be detected by a sensitive microphone. The goa

Characterization of differing forms of u

Characterization of differing forms of unburned carbon present in fly ash separated by density gradient centrifugation

✍ M.M. Maroto-Valer; D.N. Taulbee; J.C. Hower 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 94 KB

It is generally known that the ASTM LOI speci®cation is not suf®cient to identify the suitability of a ¯y ash for the cement industry, since this criterion only gives an approximation to the carbon content of a sample and in many instances provides a poor correlation with the capacity to adsorb air-