𝔖 Bobbio Scriptorium
✦   LIBER   ✦

97/02464 Assessment of strategic approaches to the commercialization of fuel cells

Publisher
Elsevier Science
Year
1997
Weight
205 KB
Volume
38
Category
Article
ISSN
0140-6701

No coin nor oath required. For personal study only.

✦ Synopsis

The authors report the development of a valve for handling a hot fluid material such as the coal dust formed in the smelting of direct reduced Fe ore. In this system. those parts of the valve body in direct contact with the material have douhle walls which contain a nonfluid medium such as kaowool between them for heat insulating the walls. Those parts which do not have direct contact, however, are cooled with a fluid medium such as water.

97102462

📜 SIMILAR VOLUMES

Assessment of the Application of Fuel Ce
Assessment of the Application of Fuel Cell APUs and Starter-Generators to Reduce Automobile Fuel Consumption
✍ T. Grube; B. Höhlein; R. Menzer 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 401 KB

## Abstract Auxiliary power units (APUs) provide electrical power, with favourable efficiency and independent of the drive system, for a variety of mobile applications. The demand for electricity increases with increasing demand for convenience and safety functions, as well as for control and regul

A Novel Approach to Engineer the Microst
A Novel Approach to Engineer the Microstructure of Solid Oxide Fuel Cell materials
✍ J. C. Ruiz-Morales; D. Marrero-López; J. Canales-Vázquez; P. Núñez; J. M. Domíng 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 929 KB

A novel and cost-effective process to accurately control the design of 3D structures of SOFC materials is proposed. A master mould is fabricated from a rubber-based material. Metallic meshes are used to transfer any type of patterns to the rubber-based material. The reusable master mould can then be

Effects of GDL Structure with an Efficie
Effects of GDL Structure with an Efficient Approach to the Management of Liquid water in PEM Fuel Cells
✍ Erin E. Kimball; Jay B. Benziger; Yannis G. Kevrekidis 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 847 KB

## Abstract A model fuel cell with a single transparent straight flow channel and segmented anode was constructed to measure the direct correlation of liquid water movement with the local currents along the flow channel. Water drops emerge through the largest pores of the GDL with the size of the d

A Simple Maxwell–Wagner–Butler–Volmer Ap
A Simple Maxwell–Wagner–Butler–Volmer Approach to the Impedance of the Hydrogen Electrode in a Nafion Fuel Cell
✍ Torben Smith Sørensen; Signe Kjelstrup 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 282 KB

A simple one-dimensional model of the impedance of a hydrogen/Nafion electrode is set up combining the usual Maxwell-Wagner approach for linear, homogeneous, and isotropic media with the linearized Butler-Volmer equation for the interfacial, electrochemical reaction. Only one relaxation semicircle i

A simple model to assess the contributio
A simple model to assess the contribution of alloyed and non-alloyed platinum and tin to the ethanol oxidation reaction on Pt–Sn/C catalysts: Application to direct ethanol fuel cell performance
✍ Ermete Antolini; Ernesto R. Gonzalez 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 288 KB

A simple model is proposed to evaluate the contribution of alloyed and non-alloyed platinum and tin to the ethanol oxidation reaction on Pt-Sn/C catalysts for direct ethanol fuel cells. On the basis of the model, the ethanol oxidation on partially alloyed catalysts occurs through a dual pathway mech