97/01973 Carbon materials for secondary lithium battery anodes, their manufacture, the anodes, and nonaqueous-electrolyte secondary lithium batteries
- Publisher
- Elsevier Science
- Year
- 1997
- Weight
- 195 KB
- Volume
- 38
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
06 Electrical power supply and utilization (scientific, technical) this purpose were determined. Controller gains, droop slopes, reference voltages and compensator ratings were found for maintaining the load nude voltages constant irrespective of system loadabilities to values which lead to voltage
## In Japanese) The batteries discussed are lithium batteries. The preparation of the anodes, which are composed of highly conductive carbonaceous material grains coated with a glassy or graphitized carbon layer, comprises applying a precursor of the carbon layer to a powdered carbonaceous material
06 Electrical power supply and utilization (scientific, technical) the polarization potential is built up at the interface. The high dielectric constant of ferroelectric films also enhances dipole polarization, substantially improving the Hz gas-induced polarization potential. The results obtained f
Electrical power supply and utilization (scientific, technical) increases with increasing sweep rate and reaches up to 90% for Li+ and 65% for C104-ions at a sweep rate of 40 mV s-'. The formation of a passive film decreases the IDE during the first intercalation/de-intercalation cycle. The open-c