02 Liquid fuels (derived liquid fuels) were prepared by adding suitable dispersants and emulsifiers. Conductivity measurement was used to distinguish the type of OCWF. The influences of ratio of components and nature of surfactants on the rheological properties and stability of OCWF were investigat
97/01890 Catalytic hydrocracking of an asphaltic coal residue
- Publisher
- Elsevier Science
- Year
- 1997
- Weight
- 198 KB
- Volume
- 38
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
โฆ Synopsis
The authors carried out catalytic hydrocracking of a residue from deasphalting a syn-crude, obtained by direct coal liquefaction of a subbituminous Spanish coal, at different temperatures and reaction times. Kinetic study of the cracking reaction has been performed. The viscosity, coke content, boiling point distribution, elemental analysis, and aromaticity of the reaction products were determined.
The experimental data were in good agreement with the first-order kinetic model proposed.
97101891
Catalytic properties of low and high temperature xylene isomerization catalysts based on ZSM-5 zeolite Smieskova, A. et al. Pet. Coal, 1996, 38, (2), 38-40 Cx aromatic hydrocarbon isomerization was carried out on activated (480", 450" hydrogen flow) Ni-exchanged ZSM 5 zeolite catalysts at 260-420". Pure ethylbenzene isomerization was studied to elucidate the mechanism of the reaction. Temperatures of >400" favour ethylbenzene conversion by dealkylation.
97101892
Char nitrogen: effect of coal type pore structure on NO/N20 evolution
๐ SIMILAR VOLUMES
Liquid fuels (derived liquid fuels) fluorine have beneficial effects on the catalyst activity. Higher conversions are given hy coal tar distillates and oil + gar yields than tetralin when the prepared catalysts are uard. ## 97lQ4536 The conversion of natural gas to liquid fuels using the SASOL sl
The effect of elemental sulfur on the conversion of residue for catalytic hydrocracking of Arabian heavy vacuum residue was tested using an autoclave reactor. The reaction condition was 703 K and 5.0 MPa of hydrogen partial pressure. Adding only a small amount of sulfur increased the conversion of r