✦ LIBER ✦

96/06015 Triboelectrostatic separation of unburned carbon from fly ash

Publisher: Elsevier Science
Year: 1996
Weight: 185 KB
Volume: 37
Category: Article
ISSN: 0140-6701
DOI: 10.1016/s0140-6701(97)83428-5

No coin nor oath required. For personal study only.

✦ Synopsis

Nuclear fuels (scientltic, technical

📜 SIMILAR VOLUMES

98/03811 Triboelectrostatic separation o

98/03811 Triboelectrostatic separation of unburned carbon from fly ash for ash recycling

📂 Article 📅 1998 🏛 Elsevier Science ⚖ 212 KB

Classification characteristics of unburn

Classification characteristics of unburned carbon from coal fly ash using a cyclone classifier

✍ J.K. Kim 📂 Article 📅 2002 🏛 Elsevier Science ⚖ 195 KB

96/02632 - Improvement of strength of br

96/02632 - Improvement of strength of briquette autoclaved from fly ash containing unburned carbon by addition of waste silica

✍ T. Ashida 📂 Article 📅 1996 🏛 Elsevier Science ⚖ 155 KB

Characterization of differing forms of u

Characterization of differing forms of unburned carbon present in fly ash separated by density gradient centrifugation

✍ M.M. Maroto-Valer; D.N. Taulbee; J.C. Hower 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 94 KB

It is generally known that the ASTM LOI speci®cation is not suf®cient to identify the suitability of a ¯y ash for the cement industry, since this criterion only gives an approximation to the carbon content of a sample and in many instances provides a poor correlation with the capacity to adsorb air-

96/03769 Biomagnetic separation of titan

96/03769 Biomagnetic separation of titanium-rich fractions from coal fly ash and from precipitated acidic leachate of coal fly ash

📂 Article 📅 1996 🏛 Elsevier Science ⚖ 178 KB

00/02809 Sources of unburned carbon in t

00/02809 Sources of unburned carbon in the fly ash produced from low-NOx pulverized coal combustion

📂 Article 📅 2000 🏛 Elsevier Science ⚖ 221 KB

## Combustion (burners, combustion systems) starch, cellulose and aminophenazone) in very large use conditions such as the concentration in a rich or a lean mixture, the vessel volume or its geometry and the choice of the vent area or the venting pressure.