𝔖 Bobbio Scriptorium
✦   LIBER   ✦

96/05210 Characteristics of the fluidized-bed combustor with a water cooled distributor

Publisher
Elsevier Science
Year
1996
Weight
191 KB
Volume
37
Category
Article
ISSN
0140-6701

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Reduction of NO emissions from a coal-fi
Reduction of NO emissions from a coal-fired fluidized bed combustor by addition of NH3 through a water-cooled injector
✍ W. Wittler; G. Rotzoll; K. SchΓΌgerl πŸ“‚ Article πŸ“… 1988 πŸ› Elsevier Science 🌐 English βš– 555 KB

To reduce NO emissions, ammonia was injected into a coal-fired fluidized bed combustor having a diameter and expanded bed height of 30 cm and a freeboard height of 100 cm. The injector consisted of a water-cooled stainless steel tube that could be moved axially to adjust the injection height. Experi

Wear of water walls in a commercial circ
Wear of water walls in a commercial circulating fluidized bed combustor with two gas exits
✍ Tae-Woo Kim; Jeong-Hoo Choi; Do W. Shun; Soo-Sup Kim; Sang D. Kim; John R. Grace πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 812 KB

The tube thickness profiles of water walls, including wing walls, were measured in a large commercial circulating fluidized bed furnace (200 tonnes steam/h, 4.97 m Γ— 9.90 m Γ— 28.98 m high) by means of an ultrasonic thickness gauge in order to investigate tube wastage patterns. Wastage of all water w