𝔖 Bobbio Scriptorium
✦   LIBER   ✦

5441692 Process and apparatus for autoclave resin transfer molding

Book ID
116176042
Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
266 KB
Volume
27
Category
Article
ISSN
1359-835X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Process analysis of resin transfer moldi
Process analysis of resin transfer molding with autoclave-assisted laminate consolidation
✍ Seong Woo Kim; Ki-Jun Lee; J. C. Seferis; Jae-Do Nam πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 721 KB

An improved resin transfer molding process was implemented by the assistance of the autoclave in epoxy/carbon fiber composite manufacturing. In the autoclave-assisted resin transfer molding (ARTM) process, the mold-filling pressure and the consolidation pressure were controlled by the autoclave in a

Process parameters estimation for struct
Process parameters estimation for structural reaction injection molding and resin transfer molding
✍ V. M. GonzΓ‘lez-Romero; C. W. Macosko πŸ“‚ Article πŸ“… 1990 πŸ› Society for Plastic Engineers 🌐 English βš– 478 KB

## Abstract Some design strategies for structural reaction injection molding (S‐RIM) and resin transfer molding (RTM) are presented. Our approach makes use of moldability diagrams to define the parameters necessary to meet the process requirements. Moldability diagrams are presented for the filling

Optimal control of accelerator concentra
Optimal control of accelerator concentration for resin transfer molding process
✍ Sun K. Kim; Dae-Hwan Kim; Isaac M. Daniel πŸ“‚ Article πŸ“… 2003 πŸ› Elsevier Science 🌐 English βš– 456 KB

Resin cure following mold filling is an essential element in resin transfer molding. To fabricate a composite part with high dimensional stability and minimize residual stress, uniform resin cure should be achieved. This study considers a three-part resin system composed of epoxy, hardener and accel

Modeling of the impregnation process dur
Modeling of the impregnation process during resin transfer molding
✍ Albert W. Chan; Sun-Tak Hwang πŸ“‚ Article πŸ“… 1991 πŸ› Society for Plastic Engineers 🌐 English βš– 563 KB

## Abstract A model has developed for simulating isothermal mold filling during resin transfer molding (RTM) of polymeric composites. The model takes into account the anisotropic nature of the fibrous reinforcement and change in viscosity of the polymer resin as a result of chemical reaction. The f