## Abstract A subharmonic injection‐locked balanced oscillator is presented in this paper. Subharmonic injection locking is preferred to fundamental injection locking, because the central injection point is a virtual short‐circuit at the fundamental frequency for a balanced oscillator. An analytica
5.2-GHz subharmonic injection-locked distributed oscillator
✍ Scribed by Chung Ming Yuen; Kim Fung Tsang
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 86 KB
- Volume
- 42
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel subharmonic injection‐locked distributed oscillator is proposed and presented. A 5.2‐GHz distributed oscillator is locked to a 2.6‐GHz injection source. The injection source is applied to the feedback path between the collector line and the base line of the distributed oscillator for optimal locking range. The circuit is designed for 2.7‐V operation. The developed oscillator delivers +3‐dBm output power with a phase noise of −110 dBc/Hz at 500‐kHz offset at 5.2 GHz. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 42: 514–516, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20354
📜 SIMILAR VOLUMES
## Abstract This work introduces a modified subharmonic injection‐locked phase‐locked loop (S‐ILPLL) that feeds the phase comparator with half the frequency of the voltage‐controlled oscillator by employing a divider in the loop feedback path. The main objective is to address the phase noise improv
## Abstract In this paper, we introduce a 5‐GHz injection‐locked phase‐locked loop (ILPLL). A new method is presented for accurate analysis of the phase‐noise performance of the proposed system. Furthermore, comparison with other phase‐noise‐estimation techniques demonstrates that our method provid
## Abstract A low‐power and wide‐locking‐range 64.8‐GHz injection‐locked frequency‐divider (ILFD) using standard 0.13 μm CMOS technology is reported. To enhance the locking range, a shunt inductor was introduced in the source node of the cross‐coupled transistor pair to maximize the equivalent load