4745008 Process for carbon-carbon composite fabrication

A one-step process for fabrication of ca

A one-step process for fabrication of carbon-carbon composites

✍ J. Economy; H. Jung; T. Gogeva 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 610 KB

CVD Carbon infiltration and strength for

CVD Carbon infiltration and strength for fabric lay-up carbon/carbon composites

✍ D.W. Bauer; W.V. Kotlensky 📂 Article 📅 1972 🏛 Elsevier Science 🌐 English ⚖ 119 KB

Experimentally derived empirical correlations will be presented which describe the influence of deposition parameters on the pyrolytic infiltration of woven and other fibrous carbon constructions of varying densities and geometries. Results are interpreted in terms of the influence of the above fact

Fabrication and Characteristics of Carbo

Fabrication and Characteristics of Carbon Nanofiber-Reinforced Carbon/Carbon Composites by Fast Catalytic Infiltration Processes

✍ Jin-Cao Zhang; Rui-Ying Luo; Xiao-Wen Wu; Qiang Li 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English

Carbon-carbon composites fabricated by w

Carbon-carbon composites fabricated by wet winding endless carbon fibers with pitch

✍ E. Fitzer; B. Terwiesch 📂 Article 📅 1972 🏛 Elsevier Science 🌐 English ⚖ 119 KB

Experimentally derived empirical correlations will be presented which describe the influence of deposition parameters on the pyrolytic infiltration of woven and other fibrous carbon constructions of varying densities and geometries. Results are interpreted in terms of the influence of the above fact

Carbon/Carbon Composite Friction Discs f

Carbon/Carbon Composite Friction Discs for Aerospace

✍ W. Buchgraber 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 676 KB

## Abstract Carbon/carbon friction discs are produced at Newmet Composites (a division of New Metals & Chemicals Ltd.) for flap jam systems in airplanes. They offer excellent mechanical and friction properties. New carbon/carbon composite grades have been developed at Newmet Composites during the l

237. Thermosetting resin impregnants for

237. Thermosetting resin impregnants for use in carbon-carbon composite processing

✍ L.E. Mcallister; J.E. Hill Jr. 📂 Article 📅 1984 🏛 Elsevier Science 🌐 English ⚖ 130 KB

The impact strength of UDmodel-composites was studied systematically by reinforcement with varied surface treated type I and type II C-fibres. The results show a different behaviour in crack-propagation using high modulus or high tensile C-fibres. This different behaviour is discussed especially wit