✦ LIBER ✦

4465581 Composite of tib2-graphite

✍ Scribed by Leslie H Juel; A Joo'Louis; Kenneth W Tucker

Publisher: Elsevier Science
Year: 1985
Tongue: English
Weight: 100 KB
Volume: 23
Category: Article
ISSN: 0008-6223
DOI: 10.1016/0008-6223(85)90046-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fabrication of TiB2 and TiB2–TiC particu

Fabrication of TiB2 and TiB2–TiC particulates reinforced magnesium matrix composites

✍ H.Y. Wang; Q.C. Jiang; Y.Q. Zhao; F. Zhao; B.X. Ma; Y. Wang 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 284 KB

Outgassing characteristics of TiC and Ti

Outgassing characteristics of TiC and TiB2 coated graphite

📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 159 KB

Ceramic composites: TiB2-TiC-SiC

✍ F. Mestral; F. Thévenot 📂 Article 📅 1991 🏛 Springer 🌐 English ⚖ 633 KB

Oxidation behavior of a NiAl/TiB2 interm

Oxidation behavior of a NiAl/TiB2 intermetallic composite

✍ B.A Pregger; T Kircher; A Khan 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 848 KB

Isothermal oxidation of a NiAI/TiB2 composite material has been investigated. Samples of NiAl with 0, l 0 and 20 vol.% TiB 2 particulates were oxidized at 1000, 1100 and 1200°C for 48 h. Thermogravimetric analysis was used to quantify oxide growth kinetics. Scanning electron microscopy with energy d

Development of Al 6063–TiB2 in situ comp

Development of Al 6063–TiB2 in situ composites

✍ C.S. Ramesh; Abrar Ahamed; B.H. Channabasappa; R. Keshavamurthy 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 901 KB

In situ TiB 2 reinforced Al 6063 composites have been successfully synthesized through the chemical reaction between Al-10%Ti and Al-3%B master alloys in the Al 6063 alloy using liquid metallurgy route. The amount of TiB 2 formed in the composite is estimated using gravimetric analysis. Mechanical p

Sintering and characterization of Al2O3-

Sintering and characterization of Al2O3-TiB2 composites

✍ Isao Kimura; Noriyasu Hotta; Yukio Hiraoka; Natsukaze Saito; Yuji Yokota 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 476 KB

## A bstra ct AI203-TiB 2 composites containing 0-50 wt% TiB 2 were prepared by sintering at 1600-1750°C ,for 15-120min in a vacuum. Relative density increased with TiB 2 addition from 97% (no TiB2) to about 99% ( lO-40wt% TiB2) on sintering at 1750°C Jbr 60 min. TiB 2 behaved as a sintering aid t