𝔖 Bobbio Scriptorium
✦   LIBER   ✦

3D printing technique applied to rapid casting

✍ Scribed by Bassoli, Elena; Gatto, Andrea; Iuliano, Luca; Grazia Violante, Maria

Book ID
120614398
Publisher
Emerald Group Publishing Limited
Year
2007
Tongue
English
Weight
284 KB
Volume
13
Category
Article
ISSN
1355-2546

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Polymer Ionomers for Rapid Prototyping a
Polymer Ionomers for Rapid Prototyping and Rapid Manufacturing by Means of 3D Printing
✍ Andreas Pfister; Uwe Walz; Andres Laib; Rolf Mülhaupt 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 647 KB

## Abstract **Summary:** The powder blend of poly(acrylic acid) (PAA) with zinc oxide or zinc oxide/magnesium oxide was applied successfully to produce zinc polycarboxylate during the 3D dispensing of an aqueous ink by means of 3D printers (Z402™ from ZCorporation and Deskmodeler™ from bmt Company)

Rapid prototyping of electrically conduc
Rapid prototyping of electrically conductive components using 3D printing technology
✍ J. Czyżewski; P. Burzyński; K. Gaweł; J. Meisner 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 574 KB

A method of rapid prototyping of electrically conductive components is described. The method is based on 3D printing technology. The prototyped model is made of plaster-based powder bound layer-by-layer by an inkjet printing of a liquid binder. The resulting model is highly porous and can be impregn