𝔖 Bobbio Scriptorium
✦   LIBER   ✦

03/02645 Numerical analysis of pulverized coal combustion characteristics using advanced low-NOx burner: Kurose, R. et al. Preprints of Symposia — American Chemical Society. Division of Fuel Chemistry, 2003, 48, (1), 308–309

Publisher
Elsevier Science
Year
2003
Weight
189 KB
Volume
44
Category
Article
ISSN
0140-6701

No coin nor oath required. For personal study only.

✦ Synopsis

16 Fuel science and technology (fundamental science, analysis, instrumentation) A Ni-Zn cell consisting of one thick nickel and one thick zinc electrode was tested for rate performance in comparison with the 670 mAh accordion-fold cell. The accordion-fold cell (1279 mAh rated capacity) was scaled-up and tested for 835 cycles at 38% DOD at a 0.3 C charge and discharge rates, and continuously operated at 38% DOD until the 1050th cycle was finished at 0.16 C charge/discharge rates. A 7115 mAh accordion-fold demonstration cell was tested at 0.28 C charge and discharge rates for 608 cycles and still had a 4.7 Ah capacity at a 0.08 C discharge rate.

📜 SIMILAR VOLUMES

03/02116 Effect of iron and calcium comp
03/02116 Effect of iron and calcium compounds on NO emission during coal combustion: Guan, R. et al. Preprints of Symposia — American Chemical Society, Division of Fuel Chemistry, 2003, 48, (1), 310–311
📂 Article 📅 2003 🏛 Elsevier Science ⚖ 188 KB

0 1 Solid fuels (preparation) Several coal samples were treated with methanol for 2-120 h, dried and characterized on their compressive strength, grindability, and by SEM analysis. The strength of the treated coal was reduced to about half of that of the parent coal. and the grindability of the trea

04/00620 An analysis of the accomplishme
04/00620 An analysis of the accomplishments of the DOE direct coal liquefaction program: Winschel, R. A. et al. Preprints of Symposia — American Chemical Society, Division of Fuel Chemistry, 2003, 48, (1), 149–152
📂 Article 📅 2004 🏛 Elsevier Science ⚖ 176 KB

0 1 Solid fuels (derived solid fuels) molecule compounds, but even components with molecule weight above 100,000 were completely gasified when the reaction temperature was raised up to 350".